Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 58)

NOTE: To save all security changes and to exit the Secure Dialog press the button beneath the OK softkey in the Secure Dialog
screen.
Enable Security
When the Enable Security field is currently active, and is checked by pressing the button under the Yes/No softkey, the Security On Dialog is
displayed. See
Figure 79 .
Figure 79. Setup > Utils > Secure > Security On Dialog
To choose the option, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the Secure Dialog is displayed with the box checked.
Disable Security
The Enable Security field is currently saved as enabled and an active blackened field. Refer to the Secure Dialog . If it is changed from checked to
disabled and unchecked by pressing the button under the Yes/No softkey, the Enter Password Dialog is displayed.
Figure 80. Setup > Utils > Secure > Enter Password Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the password is entered.
¡ If the Enable Security field is saved as enabled, then disabled by unchecking the checkbox, the Security Off Dialog is displayed.
l
If the button beneath the Up softkey is pressed, the currently active field is increased.
l If the button beneath the Next softkey is pressed, the currently active field is accepted and the next field is made active.
l If the button beneath the Cancel softkey is pressed, the Utils Submenu is displayed.
Figure 81 . Setup > Utils > Secure > Security Off Dialog
To choose the option, follow the step.
Step 1 Press the button beneath the desired softkey.
l
If the button beneath the OK softkey is pressed, the Secure Dialog is displayed with the box unchecked.
Field Value Description
Password 0000 .. 9999 Current password