Preparation for playback – Sony CCD-F36 User Manual
Page 92
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Eil
Preparation for Playback
When the V3R is connected to (he TV. refer to
the pages 7«, 76 end 78.
Connecting a TV
Connedinv
»
TV witheui audloArttieo )r^
comeckn C*SI
1 Connoci the RFU adaptor to the CCO-F36.
2 Connect the VHF antenna. CCO-F36 and TV
to the ariterwtB selector fsi^iplied with the
RFU-88UCA).
Use a 75ohm coaxial cable for aniortna
connection.
3 Set the selector switch on the antenna
selector as foUows;
For viewing a playback pictute -> VTR
For viewing TV programs *• ANT
On №e TV channel for the «Meo camera
recorder
Whenever you view the pisyhacK picture, set
the channel selector of the RFU sdaptor to
either VHF charmil 3 CH or 4 CH and a^ect
the same charwet on the TV.
[M
j
JCHfACM
64