Dynojet 424 Linx: DWRT Installation Guide - Manual (Page 10)

Linx Installation for Model 424 Automotive Dynamometers
4 2 4 L I N X I N S T A L L A T I O N
Unpacking the Linx Parts
6
nut, 9/16-12, hex (24)
P/N 36711100
nut, 3/8-16, hex (2)
P/N DM150-011-004
bolt, 9/16-12 x 2", hex (12)
P/N 36811640
bolt, 3/8-16 x 1.25", hex (4)
included as extras
P/N DM150-011-006
washer, 1/4", lock (4)
P/N 36900001
bolt, 3/8-16 x 1", hex (85
above ground, 1 to de
couple the drums, 6
additional for in ground)
P/N DM150-019-012
washer, 3/8", hardened, flat
(86 above ground)
P/N 36923100
6 additional for in ground as
P/N DM150-011-002
nut, crush, 1/4-20 (8 above
ground, 4 in ground)
P/N DM150-020-005
washer, 9/16", flat (24)
P/N 36943101
The following parts are included in the In Ground Installation P/N 78100007:
pit cover mount
P/N 21200098
bolt, 3/8-16 x 1/2", button-
head flange allen, (8)
P/N 36580434
calibration access cover (2)
P/N 21217513
pit cover assembly (2)
P/N 61329400
feet (6)
P/N 21919101
part description part description