Dynojet 424 Linx: DWRT Installation Guide - Manual (Page 9)

4 2 4 L I N X I N S T A L L A T I O N
Unpacking the Linx Parts
Version 6 Linx Installation for Model 424 Automotive Dynamometers
5
flange bearing with lock
collar (6)
P/N 32300001
lower stationary pulley
mount (3)
P/N 61300023
bushing (2)
includes three bolts and
washers per bushing
P/N 32300002
inner stationary dyno
mounting plate
P/N 61300024
grooved pulley (2)
P/N 32300003
upper moveable pulley
mount
P/N 61300025
safety wire
P/N 35300002
lower moveable pulley
mount
P/N 61300026
screw, 1/4-20 x 1.75",
shcs, drilled (4)
P/N 36500016
inner moveable dyno
mounting plate
P/N 61300027
screw, 1/4-20 x 1.25",
shcs, drilled (4)
P/N 36500017
outer shaft, drive pulley (2)
P/N 61300030
screw, 1/4-20 x 5/8", pan-
head, torx, black (64 above
ground, 16 in ground)
P/N 36561045
tension arm assembly
P/N 62100003
bolt, 3/8-16 x 1.5", flange-
hex (2)
P/N 36582471
splined shaft (2)
P/N 62200006
part description part description