Dynojet 424 Linx: DWRT Installation Guide User Manual
Page 24
Linx Installation for Model 424 Automotive Dynamometers
4 2 4 L I N X I N S T A L L A T I O N
Pulley Mounting Plates and Outer Bearings Installation
20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PULLEY MOUNTING PLATES AND OUTER BEARINGS INSTALLATION
Note: The inner pulley mounting plates and the pulley mounts are stamped with
numbers to help match the parts and guide you in the installation process.
You will need the following parts:
• 21200083
Stationary Dyno Pulley Bearing Mounting Plate
• 21200090
Moveable Dyno Pulley Bearing Mounting Plate
• 21200091
Idler Pulley Bearing Mounting Plate
• 32300001
Flange Bearing with Lock Collar (3)
• 36711100
Nut, 9/16-12, Hex (12)
• 36811640
Bolt, 9/16-12 x 2", Hex (12)
• 36900001
Washer, 1/4", Lock (4)
• 36923100
Washer, 3/8", Flat (60)
• 36943101
Washer, 9/16", Flat (12)
• 61300022
Pulley Mount, Upper, Stationary Dyno
• 61300023
Pulley Mount, Lower, Stationary Dyno (3)
used for stationary dyno pulley, lower
moveable dyno pulley, upper
idler pulley, lower
• 61300025
Pulley Mount, Upper, Idler Pulley
• 61300026
Pulley Mount, Lower, Moveable Dyno
• DM150-019-012
Bolt, 3/8-16 x 1", Hex (60)