Rice Lake 820i Programmable Indicator/Controller - Installation Manual - Manual (Page 61)

Print Formatting 57
6.3 Customizing Print Formats
The following sections describe procedures for
customizing print formats using the
Revolution
®
configuration utility, serial commands, or the front
panel (PFORMT menu. See Section 10.5 on page 94
for information about custom stream formatting.
6.3.1 Using Revolution
The
Revolution
configuration utility provides a ticket
formatting grid with a tool bar. The grid allows you to
construct the ticket format without using the
formatting commands (<NL> and <SP>) required by
the front panel or serial command methods. Using
Revolution
, you can type text directly into the grid,
then select weight value fields from the tool bar and
place them where you want them to appear on the
printed ticket.
Figure 6-1 shows an example of the
Revolution
print
formatting display.
Figure 6-1. Revolution Print Formatting Display
6.3.2 Using the Front Panel
If you have no access to equipment for communication through a serial port or are working at a site where such
equipment cannot be used, you can use the PFORMT menu (see Figure 6-2 on page 57) to customize the print
formats.
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O ALGOUT VERS
GFMT NFMT ACCFMT SPFMT TRWIN TRWOUT TRFMT
See GFMT Menus
PORT FMT
format
HDRFMT1 HDRFMT2 AUXFMT
format format
ALERT
Same as AUXFMT1
SERV
Alert email
server
PHONE
Alert modem
phone
ALERT format ONLY
AUDITFMT
PORT AUXFMT1 AUXFMT20
PORT FMT1
format
...
DISPLAY
PORT 2
PORT 4
PORT 3
PORT 2
PORT 4
PORT 3
PORT 2
PORT 4
PORT 3
NONE
NONE
NONE
Figure 6-2. PFORMT Menu