Rice Lake 820i Programmable Indicator/Controller - Installation Manual - Manual (Page 8)

4 820i Installation Manual
1.3 Softkey Operations
Softkeys can be defined to provide additional operator functions for specific applications. Softkey assignments are
listed on the tabs shown at the bottom of the LCD display; softkey functions are activated by pressing the arrow
keys below the softkey tabs (Figure 1-1 on page 3).
The particular set of softkeys shown on the display is determined by the indicator configuration and program.
Table 1-1. Configurable Softkeys
Softkey Description
Time/Date Displays current time and date; allows time and date change.
Display Tare Displays tare value for the current scale
Display Accum Displays accumulator value, if enabled, for the current scale.
Display ROC Displays rate-of-change value, if enabled, for the current scale.
Setpoint Displays a menu of configured setpoints; allows display and change of some setpoint parameters.
Batch Start Starts a configured batch.
Batch Stop Stops a running batch and turns off all associated digital outputs. Requires a batch start to resume
processing.
Batch Pause Pauses a running batch. (Same as stop, but digital outputs, if on, are not turned off.)
Batch Reset Stops a batch and resets it to the first batch step.
Weigh In Allows truck ID entry; generates weigh-in ticket for truck weighing applications.
Weigh Out Allows truck ID entry; generates weigh-out ticket for truck weighing applications.
Truck Regs Displays truck register; allows deletion of individual or all entries. Truck register can be printed by pressing
the PRINT key while the truck register is displayed.
Unit ID Allows display or change of Unit ID.
Select Scale For multi-scale applications, provides a prompt to enter the scale number to be displayed.
Diagnostics Provides access to diagnostic displays for attached iQUBE junction boxes.
Alibi Allows previous print transactions to be recalled and reprinted.
F1–F10 User-programmable keys; defined by application.
More… For applications with more than five defined softkeys, the More… key is automatically assigned to the fifth
softkey position. Press More… to toggle between groups of softkeys.
1.4 System Configurations and Options
Table 1-2 lists the
820i
system models and part numbers. All models include CPU board with one option card
slot. Each model comes equipped with a single- or dual-channel A/D.
Table 1-2. Part Numbers for 820i Models
System Model
Model PNs
Single-Channel A/D Dual-Channel A/D
Universal (tilt stand) model, 115 VAC 91995 93011
Universal (tilt stand) model, 230 VAC, North American, NEMA 15-5 power cord 91996 93012
Universal (tilt stand) model, 230 VAC, European, CEE 7/7 power cord 91997 93013
Panel mount model, 115/230 VAC (power cord sold separately) 93424 93425