Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 22)

17 CLS-920i Installation Manual
• Never use a battery that appears to have suffered abuse
• Do not crush or attempt to disassemble the battery
Charge and Discharge
• Battery must be charged in an appropriate charger only
• Never use a modified or damaged charger
• Specified product use only
Storage
• Store in a cool, dry and well ventilated area
Disposal
• Regulations vary for different countries. Dispose of in accordance with local regulations
3.5.3 Charging the Lithium-Ion Battery
The lithium-ion battery comes with a two-bay, level-3 stand alone smart battery charger, a DC power jack, and a
AC power cord as shown in Figure 3-10.
To c a l i b r a t e
t h e b a t t e r y
p a c k , p r e s s
the button on
front label.
Figure 3-10. Two-Bay Battery Charger and Parts for the Lithium-Ion Battery
The average charge time for the battery is eight hours each.
Use the following steps to charge the battery prior to use:
1. Insert the plug end of the power cable into the DC power jack on the battery charger and the AC plug into
an outlet.
2. Insert battery into the bay.
3. There is one LED indicator in front of each bay which will illuminate to indicate the status of the battery as
follows:
Table 3-3. Battery Charging LED Signals
Signal Description
Off No Battery
Green Flashing Fast Charging
Green Solid Fully Charged
Yellow Flashing Recalibrating
Yellow/Green Alternating Recalibrating
Yellow Solid Standby
Red Flashing Error