2 menu structures and parameter descriptions, 1 scales menu – Rice Lake CLS-920i Cargo Lift Scale Installation Manual User Manual
Page 28
24
CLS-920i Installation Manual
4.2
Menu Structures and Parameter Descriptions
The
920i
indicator can be configured using a series of menus accessed through the indicator front panel when the
indicator is in setup mode. Table 4-1 summarizes the functions of each of the main menus.
Table 4-1.
920i Menu Summary
Menu
Menu Function
SCALES
Configuration
Configure and calibrate scales.
SERIAL
Serial
Configure communications ports.
FEATURE
Feature
Set date and time formats, truck mode, passwords, keyboard locks, regulatory mode, and
initial consecutive number value, define softkeys and setpoint prompts.
PFORMT
Print Format
Set print format used for header, gross, net, truck in/out, setpoint, and auxiliary ticket formats.
See Section 6.0 on page 53 for more information.
SETPTS
Setpoints
Configure setpoints and batching mode.
DIG I/O
Digital I/O
Assign digital input/output functions.
ALGOUT
Analog Output
Configure analog output module. Used only if analog output option is installed.
VERSION
Version
Display installed software version number. The Reset Config softkey on the Version menu can
be used to restore all configuration parameters to their default values.
The following sections provide graphic representations of the
920i
menu structures and tables describing the menu
parameters. Default values are shown in bold type; numeric ranges and string values are shown in italic type.
Parameters shown surrounded by a dotted-line box only appear under the special circumstances explained under
each box.
4$"-&4
4&3*"-
'&"563&
1'03.5
4&5154
%*(*0
"-(065
7&34
4IPXOPOMZJG
"OBMPH0VUQVU
DBSEJTJOTUBMMFE
Figure 4-3. Configuration Menu Flow