Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 25)

CLS-920i Installation Manual 20
3.6 Two-Channel iQube Junction Box
The two-channel iQube sits in an area between the front and back plate of the scale itself, providing protection for
the two-channel iQube. The two-channel iQube comes from the factory pre-wired and no additional work needs to
be done to it. Should the user need to replace load cells, then additional information on wiring is located in the
CLS-Series Service Manual, PN 96314.
Figure 3-14. Location of Two-Channel iQube on CLS-Series Scale
3.7 Peripheral Scanner
The CLS-920i has the ability of scan bar codes of various products being moved. The scanner is mounted in a
convenient location next to the indicator as shown in Figure 3-15.
Peripheral
Scanner
Figure 3-15. Scanner Location
Additional information on the scanner is found in Section 9 of this manual.