Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 78)

75 CLS-920i Installation Manual
1. Ensure that all connections are secure.
2. Once power is applied to the scanner, the LED lights a continuous red color.
3. Ensure the bar code is within scanning range.
4. Upon successful decode, the scanner LED turns green and the beep is heard and the following screen is
displayed on the 920i indicator.
 ".
$MPTF
4$"-&








MC
&NQ
*%

(SPTT
130
/VN

8PVME
ZPV
MJLF
UP
PQFO
PS
DMPTF
UIJT
130


#BUUFSZ
-JGF
)PVST


  
1JUDI

3PMM

/PEN
Figure 9-4. 920i Screen After Scanning a Bar Code
9.3 Beeper Indications
The beeper indicates the scanner’s status as follows:
Table 9-1. Scanner Beeper Indications
Beeper Indication
3 Beeps Power up (or reset) has occured
1 Beep A bar code is successfully decoded
4 Beeps Transmission error. Bar code data was not received by
the host.
Fast Warble A programming parameter was entered successfully
9.4 Laser Pattern
The scanner has been set up to emit an omnidirectional scan pattern. The scan pattern is a high speed rotating
omni-directional scan pattern that provides very aggressive performance on 1-D bar codes because there are
virtually no holes in the pattern. This ensures fast throughput at the point of activity and the ability to read 1-D
symbols in 360 degree of rotation, eliminating the need to orient the bar code in the field of view.