Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 53)

CLS-920i Installation Manual 49
5.0 Configuration of User Parameters
The CLS-920i has many parameters that must be configured in order for the indicator software to work properly.
Once the indicator is configured for the basic scale parameters and is saved, the following main menu screen
appears.
 ".
&OE $BODFM
4$"-&


MC
&NQ
*%

(SPTT
130
/VN
#BUUFSZ
-JGF
)PVST


  
)PNF
1MFBTF
FOUFS
PS
TDBO
ZPVS
FNQMPZFF
*%

1JUDI

3PMM

Figure 5-1. CLS-920 Main Screen
Enter your employee ID or login using the numeric keypad on the 920i indicator and press the enter key. If the
employee ID is already in the CLS-920i database, the following screen appears.
 ".
.PSF

&NQMPZFF
-PHPGG
4$"-&


MC
&NQ
*%

(SPTT
130
/VN
#BUUFSZ
-JGF
)PVST


  
130
/VNCFS
1JUDI

3PMM

Figure 5-2. Employee Database Menu Screen
If the employee ID or login that is entered is a new ID, then the indicator will state that the ID Has Been Entered Into
The Employee Database and then Figure 5-2 is displayed. At this point there are three available softkeys that can be
used to either Employee Logoff , enter the PRO Number or press the More => softkey to access additional parameters.