5 supervisor menu, Sptt – Rice Lake CLS-920i Cargo Lift Scale Installation Manual User Manual
Page 58
54
CLS-920i Installation Manual
5.5
Supervisor Menu
Press the
Supervisor Menu
softkey to gain access to application parameters and other settings.Upon pressing that
softkey the operator is asked to enter a password.
".
&YJU
&OUFS1BTTXPSE
4$"-&
MC
&NQ*%
(SPTT
130/VN
#BUUFSZ-JGF )PVST
Figure 5-10. Supervisor Menu
The default password is
0
and the user will not be asked to enter a password when the password is 0. In effect,
leaving the password at 0 (zero) disables password protection. Select
Password
from near the bottom of the
Supervisor Menu list to change the password.
".
4$"-&
&YJU
4FMFDU$BUFHPSZ
"QQ1BSBNFUFST
3FQPSU)FBEFS*OGPSNBUJPO
$BMJCSBUJPO$IFDL7BMVFT
4FSJBM1PSUT
*OUFSWBMT
$MPDL
1BTTXPSE
;FSP*ODMJOPNFUFS
$MFBS1305SBOT%BUBCBTF
"QQ1BSBNFUFST
Figure 5-11. Supervisor List
The Supervisor Menu is organized as a “list of lists” and is best described in table 5-1.
Note
Any parameter description ending with an arrow => indicates that the parameter will expand to show more
parameters or softkeys when selected.