Multi-information display – Acura 2008 TSX - Owner's Manual User Manual

Page 105

Advertising
background image

While the multi-information display
shows ‘‘METER SETUP,’’ press the
SEL/RESET button on the steering
wheel. Press the INFO button until
you see ‘‘PRIMARY DISP
SELECTION’’ as shown above.

When you turn the ignition switch to
the ON (II) position, the primary
display of the trip computer always
shows ‘‘INST. MPG’’ (U.S. models)
or ‘‘INST. L/100 km’’ (Canadian
models) in default setting. You can
customize this setting to your liking
in following procedure.

Press the SEL/RESET button. The
display changes as shown above.
The lower segment changes from
‘‘INST. FUEL,’’ to ‘‘AVG. FUEL,’’ to
‘‘RANGE,’’ to ‘‘ELAPSED TIME,’’
then to ‘‘AVG. SPEED’’ each time
you press the INFO button. Enter
your selection by pressing the SEL/
RESET button.

Primary Display Selection

Multi-Information Display

102

2008 TSX

Table Of Contents

Main Menu

Advertising