Acura 2008 TSX - Owner's Manual - Manual (Page 93)

If you want to set the customizable
vehicle control settings to the default
setting, press the INFO button on
the steering wheel until ‘‘DEFAULT
ALL’’ is displayed.
Press the SEL/RESET button to
enter ‘‘DEFAULT ALL.’’ You can
change the display between
‘‘CANCEL,’’ ‘‘OK’’ and ‘‘EXIT’’ each
time you press the INFO button.
If you want to cancel ‘‘DEFAULT
ALL,’’ press the SEL/RESET button
while ‘‘CANCEL’’ is shown. The
display goes back to ‘‘CUSTOMIZE
ENTRY.’’ To set the default settings, press the
INFO button until the display
changes as shown above. Press the
SEL/RESET button to select
‘‘DEFAULT ALL.’’
DEFAULT ALL
Multi-Information Display
90 2008 TSX
Table Of Contents Main Menu