Acura 2008 TSX - Owner's Manual - Manual (Page 191)

If you are not loading CDs into all six
positions, press the LOAD button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.
If you stop loading discs before all
six positions are filled, the system
will wait for 15 seconds, stop the load
operation, and begin playing the last
disc loaded.
When that CD ends, the next CD in
the CD changer is loaded and played.
After the last CD finishes, the
system returns to the first CD.
To select a different disc, press an
appropriate preset button (1
6) or
use the Preset 5 (DISC ) to select
the previous disc or Preset 6 (DISC
) to select the next disc in
sequence. On vehicles with
navigation system, touch the
appropriate disc icon or press the
or
side of the CH/DISC bar. If
you select an empty position in the
CD changer, the system will try to
load the CD in the next available slot.
Select the CD changer by pressing
the CD button. You will see ‘‘CD’’ on
the display. The system will begin
playing the last selected CD in the
CD changer. You will see the disc
and track numbers displayed.
You can also load a CD into an empty
position while a CD is playing. Select
the empty position (the disc number
indicator is not highlighted) and
press the appropriate preset button
or touch a disc icon. The current CD
stops playing and starts the loading
sequence. The CD just loaded will
play.
Playing Discs
To Play a CD
188 2008 TSX
Table Of Contents Main Menu