Acura 2008 TSX - Owner's Manual - Manual (Page 308)

To change the bulb on the driver’s
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger’s
side, turn the steering wheel to the
left.
Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
Pull the inner fender cover away
from the fender and bumper.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise. 4.
5. 2.
1.
3.
CONTINUED
Replacing a Front Side Marker/
Front Parking Light Bulb
Lights
Ma
int
e
na
nce
305
HOLDING CLIPS
BULB
SOCKET
2008 TSX
Table Of Contents Main Menu