Acura 2008 TSX - Owner's Manual - Manual (Page 145)

Make sure that the folded seat-back
does not press against the front
passenger’s seat, as this could cause
the weight sensors to work
improperly.
Make sure all rear shoulder belts are
positioned in front of the rear seat-
back, and the center shoulder belt is
re-positioned in the guide whenever
the seat-back is in its upright position.
Be sure there are no twists in any
shoulder belt.
Do not put any heavy items on the
seat-back when it is folded down.
Make sure all items in the trunk, or
items extending through the opening
into the back seat, are secured.
Loose items can fly forward and
cause injury if you have to brake
hard. See
on page
.
Never drive with the seat-back
folded down and the trunk lid open.
See
on
page .
To release the seat-back from inside
the trunk, pull the release loop under
the trunk panel.
Push the seat-back down, then let go
of the release.
To lock the seat-back upright, push it
firmly against the trunk panel. Make
sure it is latched in place by pulling
on the top of the seat.
240
55
Carrying Cargo
Carbon Monoxide Hazard
Seats
142
RELEASE LOOP
2008 TSX
Table Of Contents Main Menu