Acura 2008 TSX - Owner's Manual - Manual (Page 154)

If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ‘‘RELEASE
PARKING BRAKE’’ message on the
multi-information display (see page
).
To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake
indicator on the instrument panel
should go out when the parking
brake is fully released (see page
).
78
63
Parking Brake
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
151
Driving the vehicle with the parking
brake applied can damage the rear
brakes and hubs. A beeper will sound if
the vehicle is put into gear with the
parking brake on.
2008 TSX
Table Of Contents Main Menu