Acura 2008 TSX - Owner's Manual - Manual (Page 90)

To change the settings, stop the
vehicle, and make sure to set the
parking brake and put the
transmission in Park (A/T) or
neutral (M/T). If you try to enter the
customizing mode while the vehicle
is moving, the above message
appears and you cannot change the
settings.
The first customizing menu is:
DEFAULT ALL
CHANGE SETTING
Every time you press the INFO
button, the display cycles from
‘‘CHANGE SETTING,’’ ‘‘DEFAULT
ALL,’’ ‘‘EXIT’’ and then back to
‘‘CHANGE SETTING.’’ Press the
SEL/RESET button to enter your
selection.
If you want the settings as they were
when the vehicle left the factory,
select ‘‘DEFAULT ALL,’’ as
described on page
.
If you want to change any vehicle
control settings, select ‘‘CHANGE
SETTING,’’ and follow the
instructions on page
.
You can also use the select/reset
knob in the instrument panel. Turn
the knob to select a setting and press
it to enter your selection.
If you do not make any changes,
select ‘‘EXIT,’’ the display returns to
normal display.
90
92
CONTINUED
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
87
AT model MT model
2008 TSX
Table Of Contents Main Menu