Acura 2008 TSX - Owner's Manual - Manual (Page 286)

If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Turn the ignition switch to the ON
(II) position.
To cancel the engine oil life display,
press the SEL/RESET button to
return to the previous display.
Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
mode will be shown on the multi-
information display.
To reset the engine oil life, press
the INFO button on the steering
wheel to select ‘‘RESET’’ on the
display, and press the SEL/
RESET button.
After the message on the multi-
information display is canceled by
pressing the INFO button, the
engine oil life display will appear in
the lower segment. You will see a
‘‘SERVICE’’ message along with the
percentage of the remaining engine
oil life and the maintenance item
code(s) displayed.
Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100 %’’ on the lower
segment of the multi-information
display and the maintenance item
code(s) erased the next time you
turn the ignition switch to the ON
(II) position.
If the engine oil life display is not
displayed, press the SEL/RESET
button on the steering wheel
repeatedly until it comes back.
1.
2.
3.
CONTINUED
Maintenance Minder
Ma
int
e
na
nce
283
‘‘SERVICE’’ MESSAGE
2008 TSX
Table Of Contents Main Menu