Jump starting – Acura 2008 TSX - Owner's Manual User Manual

Page 335

Advertising
background image

Keep the ends of the jumper
cables away from each other and
any metal on the vehicle until
everything is disconnected.
Otherwise, you may cause an
electrical short.

Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.

If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.

Start the vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.

Connect the second jumper cable
to the negative (

) terminal on

the booster battery. Connect the
other end to the grounding point
as shown. Do not connect this
jumper cable to any other part of
the engine.

7.

6.

5.

4.

Jump Starting

332

2008 TSX

Table Of Contents

Main Menu

Advertising