Acura 2008 TSX - Owner's Manual - Manual (Page 315)

Check the condition of the wiper
blades at least every six months.
Look for signs of cracking in the
rubber, or areas that are getting
hard. Replace the blades if you find
these signs, or if they leave streaks
and unwiped areas when used.
To replace a wiper blade: Disconnect the blade assembly
from the wiper arm:
Press and hold the lock tab.
Slide the blade assembly toward
the lock tab until it releases
from the wiper arm.
When replacing a wiper blade,
make sure not to drop the wiper
blade or wiper arm down on the
windshield.
Raise each wiper arm off the
windshield, lifting the driver’s side
first, then the passenger’s side.
2.
1.
Wiper Blades
312
WIPER BLADES
TAB
BLADE ASSEMBLY
Do not open the hood when the wiper
arms are raised, or you will damage the
hood and wiper arms.
2008 TSX
Table Of Contents Main Menu