Playing the am/fm radio – Acura 2008 TSX - Owner's Manual User Manual

Page 175

Advertising
background image

You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, the
preset buttons or icons, and AUTO
SELECT.

The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the FM/AM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.

XM satellite radio information is
available on page

.

The audio system for your vehicle
can also be operated using the voice
control system. See the Navi section
in your Quick Start Guide for an
overview of this system, and the
Navigation System manual for
complete details.

Use the TUNE/SOUND

knob to tune the radio to a desired
frequency. Turn the knob right to
tune to a higher frequency, and turn
the knob left to tune to a lower
frequency.

The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Turn the system on by
pushing the VOL/PWR knob or the
AM/FM button. Adjust the volume
by turning the same knob.

The SEEK function

searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the

or

side of the

SEEK/SKIP bar, then release it.

Pushing the AUDIO button will also
turn on the system.

179

On vehicles with navigation system

On vehicles with navigation system

On U.S. models

Playing the AM/FM Radio

To Select a Station

To Play the AM/FM Radio

Voice Control System

TUNE

SEEK

172

2008 TSX

Table Of Contents

Main Menu

Advertising