Acura 2008 TSX - Owner's Manual - Manual (Page 288)

CONTINUED
Also, the percentage ‘‘0 %’’ keeps
blinking on the display.
To cancel the engine oil life display,
press the SEL/RESET button to
return to the previous display.
If the indicated required service is
not done and the remaining engine
oil life becomes 0 %, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total mileage after the remaining
oil life became 0 %, and the
maintenance item code(s).
This particular message is displayed
when the mileage is less than 10
miles (for U.S. models) or 10 km (for
Canadian models) after the engine
oil life became 0 %.
After the message on the multi-
information display is canceled by
pressing the INFO button, the
engine oil life display will appear in
the lower segment. You will see a
‘‘SERVICE’’ message along with the
percentage ‘‘0%’’ and the
maintenance item code(s) displayed.
Maintenance Minder
Ma
int
e
na
nce
285
CANADA U.S.
2008 TSX
Table Of Contents Main Menu