ALTANA LCS III - Manual (Page 12)

11
Installation
3.5.2 Installation of the cell adapter
1. Open the cell compartment.
2. Insert the adapter for measurements with the round
cuvette/sample cell (11 mm) and/or 10 mm square
cuvette/sample cell so the arrow on top of the adapter points to
the left (
Figure 4 ) and the orientation tab fits the groove in the
compartment opening.
Note: The arrow on top of the adapter indicates the direction of the light
beam path.
Figure 4 Cell adapter Z
1 Adapter Z: 10 mm square cell adapter