ALTANA LCS III - Manual (Page 9)

8
Installation
3.3 Power connections
Install the correct adapter plug on the supplied external power
supply (
Figure 1 ). Slide the adapter on until it "clicks" into position.
Plug the external power supply cord into the connector on the back
panel of the instrument, then plug the supply into a power outlet
(100–240 V~ / 50–60 Hz). Press the power switch on the back of
the instrument to initialize power (
Figure 2 on page 9 ).
Figure 1 Power adapter
1 Power supply with EU adapter plug installed 3 USA adapter plug
2 UK adapter plug 4 AUS/China adapter plug