Standard operations – ALTANA LCS III User Manual
Page 69
68
Standard Operations
Time & interval:
1.
Press Time & Interval in the Options menu.
2.
Input the total time and the reading time and press OK to
confirm.
Note: In total 500 measuring steps are possible. To select a total time and
a time interval that would cause this number of measurements to be
exceeded, the time interval is defined automatically and the OK key is
inactivated.
Table 11 Time course setup options
Option
Description
More
For further Options
Store icon
To store the scan data
Time & Interval
To input the total time for data collection and the time interval between the collection of data
points
λ
To input the wavelength setting
View Table
To display readings in absorbance, transmittance or concentration. This can be changed after
sample data are collected
Scale & Units
Scale: In the automatic scaling mode, the y-axis is automatically adjusted so that the total scan is
displayed.
The manual scaling mode allows sections of the scan to be displayed.
Units: Choice of absorbance or transmittance.
Send Data
To send Data to a printer, computer or USB memory stick (Type A)
Recall Data
Call up saved measurement data, wavelength scans or time courses, see
Instrument Setup
Basic data of the instrument, see
.