ALTANA LCS III - Manual (Page 18)

17
Standard Operations
5.2 Instrument Setup mode
1. Select Instrument Setup in the Main Menu.
A selection of configuration options appear.
5.2.1 Operator ID
Use this option to enter up to 30 sets of operator initials (up to five
characters each). Also the color can assigned for each Operator ID.
This feature helps record which operator measured each sample.
1. Press Operator ID in the Instrument Setup.
2. Press New to enter a new Operator ID.
3. Use the alphanumeric keypad to enter a new Operator ID.
4. Press OK to confirm.
Select one of the four preset color palette in the Select Color menu
to assign to the Operator ID.
5. Select a color category to highlight the color for the display
background.
Note: Press Cancel to select the default setting.
6. Press OK to confirm.