Compatible Systems 5.4 - Manual (Page 125)

Chapter 7 - VPN Client Tunnels 119
VPN Group Configuration IPX Connection Tab
VPN Config IPX Connection Tab
> Local IPX Net
This edit box specifies the entry of the first local IPX network number to be
assigned to client sessions under this configuration. This address will be
incremented by one for each new client session, until the Max Connection
limit (specified on the General Tab) is reached. When a client is connected to
the device, the first available IPX address from this range is assigned to that
session. The IPX address is freed when the client session is finished.
Each of the addresses thus generated must be a valid, unique and unused IPX
address. Also, these addresses must not conflict with any networks specified
in other VPN Group configurations or with any other IPX address within the
server.
v Note: There is no default value for the Local IPX Net. In order for
IPX-in-IP tunneling to operate with this VPN Group configuration, a group
of local IPX addresses must be set using either the Local IPX Net, or a
RADIUS server must be configured to serve the addresses (see Assign IPX
Radius).
Block Type 20
In order for certain protocol implementations, like NetBIOS, to function in
the NetWare environment, routers must allow a broadcast packet to be prop-