Compatible Systems 5.4 - Manual (Page 253)

Chapter 14 - General 247
The following example shows a range of IP addresses being mapped as a
translation pair.
[ NAT Mapping ]
10.5.3.0/29 -> 198.41.9.200/29
Logging Configuration Dialog Box
Logging Configuration Dialog Box
To access this dialog box, select Logging from the Device View.
> Logging On
This setting determines whether the internetworking device will output
logging information via any of the possible output methods (as discussed
below). Logging is on by default.
Log Level
This pull-down menu selects the detail of the logging information provided.
• The Notice setting provides information that may be useful on a
day-to-day basis by an administrator but generally does not require any