Compatible Systems 5.4 - Manual (Page 32)

26 Chapter 2 - IP Routing & Bridging
TCP/IP Routing: WAN Configuration Dialog
Box
TCP/IP Routing: WAN Configuration Dialog Box
v Note: If you need more information about the IP protocol, see “IP 101” in
the Appendices to this manual.
To access this dialog box, select WAN/TCP/IP Routing from the Device
View.
> IP Routing/Bridging/Off
This set of radio buttons controls how IP packets are handled for this inter-
face.
• If set to IP Routing, then IP packets received on this interface are routed
to the correct interface on the router.
• If set to IP Bridging, then any IP packets received on this interface are
forwarded to the router’s internal bridge. This setting makes this WAN
interface a member of the “IP Bridge Group” for this router.