Compatible Systems 5.4 - Manual (Page 7)

Chapter 1 - Installation and Overview 1
Chapter 1 - Installation and
Overview
CompatiView Quickstart
• Follow the instructions in the Installation Guide for your internetworking
device to connect it to your network.
• Install CompatiView by running the install program included on the
CD-ROM which was included with your Compatible Systems device.
• Run CompatiView.
• Select a network transport protocol using the Database menu’s Options
dialog box.
• Add your device to CompatiView’s device view using the Open menu
item under the File menu.
• Click on your device in the Device View to open a list of configuration
section icons. The default password is “letmein.”
• Open configuration dialog boxes by double clicking on the protocol
icons under each configuration section icon.
• Edit the device’s default configuration using these dialog boxes.
• Download your changes to the device using the Save to Device menu
item in the File menu.
v Note: Parameters and options in this manual which are marked with a >
symbol must be set in order to use the associated device feature.
v Note: If this Quickstart section is a little too quick, don’t worry. This
manual completely documents CompatiView. You can use it as a reference to
learn more about any of the steps listed above.