Compatible Systems 5.4 - Manual (Page 17)

Chapter 1 - Installation and Overview 11
be loaded to the file on disk. If left unchecked, you will be prompted each
time the config files are changed and not loaded to disk.
• Hide Data in Secure fields. This checkbox will not show passwords in
display dialogs or edit boxes, or the text configuration of the current
device in Local Config View at the bottom of the screen. If this box is not
checked, passwords will be displayed in the clear.
• Cascade new windows as they are opened. This checkbox specifies
how the dialog boxes in the Main Window are displayed.
Confirmations Tab
• Confirm before deleting devices from the database. This checkbox
controls whether a confirmation prompt will appear before a device is
deleted from the Device View.
• Confirm before deleting subinterfaces. This checkbox controls
whether a confirmation prompt will appear before an IP subinterface is
deleted.
• Confirm before deleting VPN Ports. This checkbox controls whether a
confirmation prompt will appear before a VPN port is deleted.
• Confirm before deleting Firewall Paths. This checkbox controls
whether a confirmation prompt will appear before a firewall path is
deleted.
• Confirm configuration download. This checkbox controls whether a
confirmation prompt will appear before a configuration is downloaded to
a device.
• Confirm before restarting devices. This checkbox controls whether a
confirmation prompt will appear before a device is restarted.
• Confirm before resetting device statistics. This checkbox controls
whether a confirmation prompt will appear before resetting device statis-
tics.
Save/Restart Tab
v Note: These selections are global and only sets the “default” for a device
when it is added to the database. They do not change the mode for a device.
To change the Save/Restart mode for a particular device, modify the “Device
Properties” for that device.
• Save config and restart device. This parameter will save an edited
configuration to the device’s Flash ROM and restart the device to apply
the changes. This is the equivalent of the command line’s save
command.