Ospf route aggregation, Rip to ospf – Compatible Systems 5.4 User Manual
Page 60
54
Chapter 2 - IP Routing & Bridging
IP Route Redistribution Dialog Box
To access this dialog box, select Global/IP Route Redistribution from the
device view.
OSPF Route Aggregation
This checkbox sets whether static and RIP routes will be consolidated along
class boundaries before they are advertised into OSPF. If the router has a split
subnet coming into the device from different interfaces, the box should be left
unchecked.
v Note: OSPF Route Aggregation is only used for importing static and RIP
routes into OSPF. Aggregation of BGP routes is set in the BGP Aggregation
dialog box. Refer to Chapter 16 - BGP for more information on configuration
of BGP.
RIP to OSPF
This checkbox sets whether the router will redistribute RIP routes into OSPF.
•
Type 1 is the sum of both the external cost and the internal cost used to
reach that route.