Compatible Systems 5.4 - Manual (Page 13)

Chapter 1 - Installation and Overview 7
Download Config to Device Dialog Box
Save / Restart Options
The settings in this dialog box are specific for this device. For global
Save/Restart settings use the Database menu, select options, and choose the
Save/Restart tab. To change the Save/Restart mode for a particular device,
modify the “Device Properties” for that device.
• Save config and restart device. This parameter will save an edited
configuration to the device’s Flash ROM and restart the device to apply
the changes. This is the equivalent of the command line’s save
command.
• Save config, but don’t restart device. This parameter will save an
edited configuration without restarting the device. The changes will not
be applied until the device is restarted. This is the equivalent of the
command line’s write command.
• Don’t save config, but use new config immediately. This parameter
will apply an edited (but not saved) configuration to the device’s current
operations. If a restart occurs, changes will be lost. This is the equivalent
of the command line’s apply edited command.
• Save config and use immediately without restarting. This parameter
will save an edited configuration and immediately apply it to the device’s