Compatible Systems 5.4 - Manual (Page 170)

164 Chapter 10 - WAN Link Protocols
DLCI Database Dialog Box
DLCI Database Configuration Dialog Box
DLCI Entry Dialog Box
v Note: If you need more information about the Frame Relay protocol, see
“Frame Relay 101" in the Appendices to this manual.
You can access the Frame Relay DLCI Database Dialog Box by selecting
Frame Relay Link from the Link Type pulldown in the Link Configuration:
WAN Dialog Box (under WAN/Link Configuration), and then clicking on
the DLCI button at the bottom of the dialog box. This window displays all
DLCI mapping entries, but is not used to add or modify the entries. To add or
modify the entries, you must access the DLCI Entry Dialog Box by selecting
the Add... or Modify... buttons in the Frame Relay DLCI Database Dialog
Box.