Compatible Systems 5.4 - Manual (Page 233)

Chapter 14 - General 227
To access this dialog box, select Global/System Configuration from the
Device View.
> Device Name
This is the name which is used to advertise this device on both AppleTalk and
IPX networks. Thus, it is the name CompatiView displays in the Open -
Device screen (accessed from the File menu).
> Password
This is the main password used to access the device from CompatiView and
from the command line (either Telnet or auxiliary port operation). This login
level will allow a user to display tables and statistics, but does not permit a
user to view or make any changes to the configuration.
v Note: If you lose the password for a Compatible Systems device, you can
enable the default letmein password for five minutes by setting the switch
marked “Test” or “Mode” on the back of the device to 9 and restarting the
device. Make sure you set the switch back to 0 after you have set a new pass-
word into the device.
> Confirm Password
This box is used to confirm the entered Password.
> Enable Password
This password will enable supervisor mode for viewing or making changes to
a device’s configuration. If no Enable Password is created, then the Pass-
word will be used.
> Confirm Enable Password
This box is used to confirm the entered Enable Password.