Compatible Systems 5.4 - Manual (Page 56)

50 Chapter 2 - IP Routing & Bridging
> Server IP Address
You may enter server IP addresses in this list. When the Server IP Address
edit box is selected, the Add, Delete, and Modify buttons will be activated for
the list.
> UDP Ports/Protocols
This list allows you to enter the ports for which UDP relay will be performed.
The list will show the services for well known ports in parentheses. When the
UDP Port edit box is selected, the Add, Delete, and Modify buttons will be
activated for the list.
The pull-down menu on the UDP Port edit box provides a list of well known
services and automatically enters the UDP port number for a selected service
into the list.
WAN IP Options
WAN IP Options Dialog Box
To access this dialog box, select WAN/TCP/IP Routing from the Device
View, then click on the Options button.
This dialog box provides access to settings for Remote Node IP Address, Van
Jacobson Header Compression, and IP Address Configure Request.
> Optional Remote End-Node Address
Besides defining a method for router-to-router communication, the PPP
protocol defines a method for individual client machines to dial in to a router
interface. Once a client machine has connected to a router interface in this
fashion, the router provides proxy services which allow the client machine to
participate as a node on one of the router’s local networks.