Compatible Systems 5.4 - Manual (Page 190)

184 Chapter 11 - TCP/IP Filtering
Block IP Source Routing
This check box sets a filter in the device which drops any received packet
which has the “source route” option set.
Log Rejected Source-Routed Packets
This checkbox tells the device to add a log entry (if logging is turned on)
whenever the Block IP Source Routing checkbox is set and a packet is
received with the source route option set. See the section on the Logging
Configuration Dialog Box of this manual for more information.
TCP/IP Filter Editor Window
TCP/IP Filter Editor Window
The editor window shown above is used in CompatiView for editing all
TCP/IP filter sets, including those for TCP/IP Route and Packet filters. The
editor window type can be identified by the text at the top of the window, and
will only allow you to create or select the type of filter set for which it was
selected.