Compatible Systems 5.4 - Manual (Page 137)

Chapter 8 - IntraGuard Firewall Configuration 131
Chapter 8 - IntraGuard Firewall
Configuration
There are three pre-set paths in the IntraGuard Firewall. A path defines a
route for packets through the firewall. Each of the three paths already has a
name, a security policy and interface definitions. While the names and param-
eters of the firewall paths can be modified, the default settings should work
for many installations.
Firewall paths can be added to the edit area of a device, renamed or deleted.
To Add a path, right-click on any configuration item for the device, then
select Firewall Path/Add Firewall Path from the popup menu.
v Note: The IntraGuard Firewall currently supports up to three firewall
paths. Any additional paths may cause configuration problems. It is recom-
mended that you add firewall paths only if you have previously deleted a path,
so that no more than three paths exist at a time.
To Rename a path, right-click on the path’s icon, then choose Firewall
Path/Rename Firewall Path
To Delete a path, right-click on the path’s icon, then choose Firewall
Path/Delete Firewall Path.
These functions are also available in the File menu.