Chapter 2 - ip routing & bridging, Tcp/ip routing: ethernet dialog box, Ip routing/bridging/off – Compatible Systems 5.4 User Manual
Page 27: Chapter 2 - ip routing & bridging 21, Tcp/ip r, Outing, Thernet, Ialog
Chapter 2 - IP Routing & Bridging
21
Chapter 2 - IP Routing & Bridging
TCP/IP Routing: Ethernet Dialog Box
TCP/IP Routing: Ethernet Configuration Dialog Box
v Note: If you need more information about the IP protocol, see “IP 101” in
the Appendices to this manual.
To access this dialog box, select Ethernet/TCP/IP Routing from the Device
View.
>
IP Routing/Bridging/Off
This set of radio buttons controls how IP packets are handled for this inter-
face.
•
If set to IP Routing, then IP packets received on this interface are routed
to the correct interface on the router.
•
If set to IP Bridging, then any IP packets received on this interface are
forwarded to the router’s internal bridge. This setting makes this Ethernet
interface a member of the “IP Bridge Group” for this router.