Compatible Systems 5.4 - Manual (Page 251)

Chapter 14 - General 245
NAT Mapping Dialog Box
NAT Mapping Dialog Box
NAT Range Dialog Box
You can access the NAT Mapping Dialog Box by selecting Global/NAT
Configuration from the Device List. This window displays a list of all entered
one-to-one NAT Mapping translation pairs but is not used to add or modify
the entries. To add or modify the entries, you must access the NAT Range
Dialog Box by selecting the Add... or Modify... buttons.
These one-to-one translation pairs allow the user to provide access from the
internal or external network to selected parts of the NAT internal network,
such as a web server.
Each translation pair must be entered using the following syntax:
<internal IP address> [ /<bits> | :<port> ] [ -> | = ] <external IP address>
[ /<bits> | :<port> ]