Compatible Systems 5.4 - Manual (Page 58)

52 Chapter 2 - IP Routing & Bridging
TCP/IP Routing Options
TCP/IP Routing Options Dialog Box
This dialog box can be brought up selecting Options/TCP/IP Routing from
the Device View. These parameters are not associated with a particular inter-
face and are global to the device.
RIP V2 Password
This password is used for authentication of RIP 2 packets received by the
device. It is also included in RIP 2 packets sent by the device.
IP Multiprotocol Precedence Dialog Box
IP Multiprotocol Precedence Dialog Box
This dialog box sets the precedence order the router will follow for including
routes in its routing table when multiple IP routing protocols are in use on the
network. To access this dialog box, select Global/IP Multiprotocol Prece-
dence from the Device View.
Protocol Precedence
This pull-down menu sets the precedence order for including routes in the
device’s IP routing table. This parameter is only relevant if there is more than
one possible route to a destination. For example, if there are no OSPF or RIP