Compatible Systems 5.4 - Manual (Page 127)

Chapter 7 - VPN Client Tunnels 121
> Input Filters
These pulldowns allow the selection of previously created filter scripts which
will be applied to tunnel packets coming into the device from users who are
connected according to the selected configuration.
Up to four separate filters may be selected.
> Output Filters
These pulldowns allow the selection of previously created filter scripts which
will be applied to tunnel packets sent out of the device to users who are
connected according to the selected configuration.
Up to four separate filters may be selected.
v Note: IPX Filters are created using the IPX Filter Editor. For more infor-
mation on creating and editing IPX Filters, refer to Chapter 11 - IPX
Filtering.
VPN Group Configuration Rollover Tab
VPN Group Configuration Rollover Tab
Alternate IntraPort Addresses
This list displays all entered alternate IntraPort addresses. If an alternate
address (or addresses) has been set, an IntraPort server which is full will be
able to roll a client over to the specified alternate server. The IP address
should be in standard dotted-decimal notation.