Compatible Systems 5.4 - Manual (Page 145)

Chapter 8 - IntraGuard Firewall Configuration 139
Security Policy Protocol Setting Dialog Box
Security Policy Protocol Setting Dialog Box
To change the individual protocol settings, select a protocol in the Security
Policies: Firewall Path Dialog Box and then click the Modify... button. The
Security Policy Dialog Box will appear in the Main Window.
v Note: Changing the Current Security Policy will override any individually
made protocol settings.
Policy
This pull-down menu allows you to set how the selected protocol’s packets
will be handled on the path.
• In means that a protocol will be allowed through to the inside interface(s)
of a path.
• Out means that a protocol will be allowed through to the outside inter-
face(s) of a path.
• None means that a protocol will be allowed neither in nor out.
• Both means that a protocol will be allowed both in and out.
Protocols
• BGPUse defines how BGP (Border Gateway Protocol) packets will be
handled on the path. BGP is the routing protocol between Internet back-
bone routers.
• BSDUse defines how BSD packets will be handled on the path. BSD is
the UC Berkeley remote execution and terminal session protocol. RSH,
RCP, RLogin, and RExec are the protocols supported.
• CompatiViewUse defines how CompatiView packets will be handled
on the path. CompatiView is Compatible System’s GUI manager. This
option also defines handling for earlier versions of STAMP, Compatible
System’s tunnel authentication protocol.