Compatible Systems 5.4 - Manual (Page 234)

228 Chapter 14 - General
SNMP Configuration
SNMP System Info Configuration Dialog Box
SNMP System Info Configuration Dialog Box
To access this dialog box, select Global/System Configuration from the
Device View, and then select the SYSINFO button.
The information in this dialog box is returned by the device in response to
SNMP (Simple Network Management Protocol) queries from SNMP
consoles for the SNMP MIB-II System Group, as specified in RFC 1213.
Each of the entries may be up to 255 characters.
> Name of Administrator and How to Contact
This is the name of the contact person for this device, together with informa-
tion on how to contact the administrator.
> Administrative Name
This is the administratively assigned name for this device. By convention, this
is the fully qualified domain name for the device.
> Location of this device
This is the physical location of the device (e.g. telephone closet, 3rd floor).