Toshiba LF494 User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 4
■ To change the preset functions:
The folJowiiig example shows how (o change the preset level function from No, U to No. L
Key operation
Display example
Description
SET
□
H2: PRESET FUNCT
0;HOLD
Press [SET] first lo start the items seiection sequence
and select
H2:
PRESET FUNCT from among the
configuration items using [ ► ] and [
^ ]
keys. Then
press [SET] again lo display the current preset level
function fU: HOLD in this example).
►
□
H2: PRESET FUNCT
0:H0LD
Pressing [ ► ], the cursor appears.
▲
□
HZ: PRESET FUNCT
l:S0ms PULSE
Change the value to ‘*1” by pressing [-^ ].
SET
HZ: PRESET FUNCT
1 :5Diis PULSE
Pressing [SET], Ihe cursor disappears and the new
preset level function display flickers. Press [SET] again
to save the new function.
SET
□
HZ: PRESET FUNCT
Pressing [SE'J’j, the system returns to the items
selection sequence.
- TO O -