Toshiba LF494 - Manual (Page 113)

TOSHIBA
6 F 8 A 0 7 7 4
U&ing the optìufidl DI signal
Remote operations for the totalizer and puise ouiput cim be conducicd using ihe optional DI
signal. The following functions in the table can be performed. See 8,2.9 “Digital I/O“ to
select these functions.
DI signal (normal converter, detective level: H level)
Digital input (D1)
Functions
D1 voltage level Totalizer and pulse output
Totalizer
L level Stops the tolulizer and the pulse output.
Start/Stop H level
Starts the totalizer and the pulse output.
Totalizer
II level
Stops and clears (resets) the totalizer.
Reset/Start L level Starts the totalizer and the pulse output.
* In case of the converter for special specifications (refer to 7,3,3 “Converter for Spcci^^l
specifications"), you can select Digital Input Detective Level (Only for Counter Control).
For detail, see 8,2. ly “Digital Input Detective Lever
^Select II level(l:ll LEVEL) ; refer to upper table," DI signa](normal converter,
detective level: II level)“.
*Select L levd(0:L LEVEL) : refer to under table/' DI signal(converter for
special specifications detective level: IJevel)“,
DI signaUconverter for special specificatioris, detective level: L level)
Digital input (DI)
Functions
Dl voltage level Totalizer and pulse output
Totalizer
L level
Starts the totalizer and the pulse output.
гSíartУStop
FI Lvcl
Slops the totalizer and the pulse ouiput.
Totalizer
II level
Starts the totalizer and the pulse output.
Reset/Stiirt I. level
Stops and dears (resets) the totalizer.
1 1 2 -