Toshiba – Toshiba LF494 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 4
To change the setting value:
Key operation
Display example
Description
^ ►
□ □
C?: RAWGE 1
Items selection sequence displays.
Selects the desired item (indicated by an
alphabet letter and a number) first by selecting the
digit (alphabet or number) with [ ► ] and then
changing the value w'ith [▲ j.The example shows
“C2:RANGE 1 '
S K Y
□
C2; RANGE 1
02
.
000
n/s
Press [SET] to vSelect the desired item setting
value. And the cursor disappears and the item
setting value displays.
You can check it.
□
C2: RANGE 1
02
.
000
m/s
Pressing [ ► ), the cursor appears.
Parameter changing sequence
: □
C2; RANGE 1
¡ 2 .
000
m/s
Change the value by pressing ].
►
□
C2: RANGE 1
12
.
000
m/s
Then move the cursor to another digit by pressing
[ ►
1
-
▲ ►
□ □
C2: RANGE 1
05.
000
m/s
Change the value by pressing Then move
the CLirsor to another digit by pressing [ ► j and
change the value.
In This example repeal (his prercess tmiil the
display shows "'05. ODOm/s
5ET
C2: RANGE 1
05. 000 m/s
Бу pressig [SET], flickers the selected value to
confirm changes made for the selected item.
▲
i
C2: RANGE 1
02. OOO m/s
By pressing [-^1» to return to the parameter
changing sequence.
S \ :
y
□
C2: RANGE 1
05. 000 m/s
By pressing [SE'l 1, stores the indicated value and
Slop
flickering of data.
-
39
-